02890 370 416
02890 779 823
sales@djkilpatrick.co.uk
 
Picture of Audio Technica PRO47T Gooseneck Mic

Audio Technica PRO47T Gooseneck Mic

This double-gooseneck cardioid condenser microphone with integral power module and 5/8"-27 adapter-mount is ideal for boardroom, school, government, house of worship and other installed applications.

Full Description

 

PRO47T

Download
Hi-Res
PRO47T

This double-gooseneck cardioid condenser microphone with integral power module and 5/8"-27 adapter-mount is ideal for boardroom, school, government, house of worship and other installed applications. Featuring a wide-range condenser element with low-mass diaphragm for superior performance, the microphonefs self-contained electronics eliminate need for external power modules. Available in two lengths: 12.40" (PRO47T) and 15.79" (PRO47TL).

  • Wide-range condenser element with low-mass diaphragm for superior performance
  • Self-contained electronics eliminate need for external power modules
  • Flat, smooth frequency response
  • Quiet, fixed-placement, long-life gooseneck
  • Direct mounts to any 5/8"-27 stand, or to included threaded mounting stud
  • 9.8' (3.0 m) cable permanently attached between microphone and XLRM-type connector
  • Overall length of 12.40" (315.0 mm)
  • Also available in a 15.79" (401.0 mm)-long version as PRO47TL
  • Element: Fixed-charge back plate, permanently polarized condenser
  • Polar Pattern: Cardioid
  • Frequency Response: 70-16,000 Hz
  • Open Circuit Sensitivity: -37 dB (14.1 mV) re 1V at 1 Pa
  • Impedance: 100 ohms
  • Maximum Input Sound Level: 134 dB SPL, 1 kHz at 1% T.H.D.
  • Dynamic Range: 106 dB, 1 kHz at Max SPL
  • Signal to Noise Ratio: 66 dB, 1 kHz at 1 Pa
  • Phantom Power Requiremens: 9-52V DC, 2 mA typical
  • Weight: 2.2 oz (63 g)
  • Dimensions: 12.40" (315.0 mm) long, 0.47" (12.0 mm) head diameter
  • Output Connector: 3-pin XLRM-type on cable
  • Cable: 9.8' (3.0 m) cable permanently attached between microphone and XLRM-type connector
  • Accessories: AT8146 windscreen; AT8425 5/8"-27 threaded mounting stud